1. Two core working heads: hydraulic hammer and hydraulic rotary head (drilling motor), switchable on site. 2. Hammer configuration: 5.5 m from hammer bottom to ground. 3. Rotary head configuration: approx. 5.0 m effective mast stroke; DTH drilling up to 5.5 m, auger drilling up to 5.0 m (no drill rod extension needed). 4. Mast adjustability: 40 cm horizontal extension, up to 100° forward tilt, ±10° luffing swing. 5. 360° rotation — Zhongyi hydraulic motor and rotary bearing. 6. Undercarriage: Eddie hydraulic track motors; each track 2800 mm L × 300 mm W × 600 mm H; steel track standard, rubber track or rubber-block-on-steel optional. 7. Hydraulic system: 105 L oil tank, breathing valve on top, sealed against contamination. 8. Control: integrated operating console; optional remote-control system with ~100 m range.
Share to:
Product Description
Product Features
Product Specifications
Application Scenarios
Product Description: Built for contractors who want to move fast on rough sites, the YGL-600R Solar Pile Driver Machine combines a modular working head, a highly adjustable mast and an optional remote-control station into one crawler platform. Whether the job is screw piles for a solar farm, auger holes for fencing, or hammer piling on uneven ground, the operator can adapt the rig to the terrain — and, with the optional remote system, run the whole machine from up to 100 m away. That means fewer people on the ground, safer work near edges or trenches, and higher daily output.
Product Features： 1. Run the whole site with one person— the integrated console consolidates all operations; with the optional remote, a single operator can walk the rig, set up and drive it without a spotter in the cabin. 2. Cut the construction crew, raise the daily pace — remote control (~100 m) lets the operator stand at the exact point of penetration, judge verticality in real time, and start/stop without climbing in and out. 3. Adapt to bad ground instead of leveling it— 100° tilt, 40 cm side shift and ±10° swing let the mast match the slope, saving grading work on hilly solar sites. 4. Faster cycle, less rod fiddling — 5.0 m single-pass stroke and 5.5 m reach mean fewer rod joints per hole, less manual handling, less alignment error. 5. Proven domestic hydraulics — Zhongyi rotation and Eddie track motors are established names with a track record of reliable field service. 6. Protect both the site and the road — long steel tracks for grip on mud and rock; swap to rubber tracks or add rubber blocks when working on asphalt or highway guardrail jobs to avoid surface damage. 7. Longer oil life, lower consumable cost — sealed 105 L tank with breathing valve keeps oil clean and non-emulsified, extending service intervals.
Product Specifications： YGL-600R Solar Pile Driver Machine Price
Item
Value
Unit
Pile driving height
5500
mm
Ground screw installation height
5500
mm
DTH driling depth
5000
mm
DTH driling diameter
50-350
mm
Auger driling depth
5000
mm
Auger drilling diameter
50-400
mm
Work dimensions (L ×W × H)
4400*2585*7565
mm
Transport dimensions (LxWx H)
3640*1900*2580
mm
Operating weight
6300
kg
Track plate width
300
mm
Track drive ratio
1:21.4
--
Climbing ability
≤30
°
Rated power
91
KW
Hydraulic oil pump
63+32 Double- pump
--
Hydraulic system pressure
200
bar
Hydraulic system flow
170
I/min
Torque of walking motor
7700
N·m
Walking speed
0-3
Km/h
Single impact energy of hydraulic hammer
1260
J
Driling angle (right and left)
0-10
°
Drilling angle (anterior and backward )
0-100
°
Hydraulic oil tank capacity
~105
L
Fuel tank capacity
85
L
Application Scenarios： 1. Foundation piles for solar photovoltaic (PV) panel mounting structures 2. Slope stabilization; drilling for small-scale rock bolts or anchor cables 3. Foundation drilling for communication towers and billboards 4. Municipal or industrial park projects in confined spaces or areas where damage to existing pavement is prohibited
Product Description ： The 700-meter pneumatic water well drilling rig is a high-efficiency drilling unit designed specifically for the development of ultra-deep groundwater resources. Combining advanced pneumatic technology with a powerful drive system, it ensures rapid and precise drilling operatio
Product Description： The YGRC-200 is a 200-meter-class, crawler-mounted, self-propelled reverse circulation exploration drill rig. It offers a maximum drilling depth of 200 meters and a hole diameter range of 140–254 mm. Equipped with a medium-to-high air-pressure down-the-hole (DTH) hammer, it achi
Product Description ： Choosing the YGQZ-400 pneumatic water well drilling rig offers an ideal balance of drilling depth, investment cost, and operational efficiency. With a maximum drilling depth of 400 meters, this model meets requirements for medium-to-deep wells—including those for domestic water
Product Description： The dual-purpose water and air drilling rig is a highly efficient and flexible piece of drilling equipment, specifically designed to meet the requirements of water well drilling across diverse geological conditions. Featuring a dual-power system that supports both water-based an
Product Description： This high-performance, truck-mounted drilling rig is powered by a Yuchai engine and equipped with a medium-to-high air-pressure percussive drilling system. It offers a maximum drilling depth of 200 meters and supports borehole diameters ranging from 140 to 305 mm. The rig utiliz
